LogoLogo
Pinnacle 20|20 Controls
Pinnacle 20|20 Controls
  • Pinnacle 20|20 Controls
    • Overview
    • Home Page
    • Operation
      • Control Page
      • Overview Page
      • Monitor Page
    • System Settings
      • Overview
      • Fan Settings
      • Takeaway Equipment Settings
      • Grain Fill Settings
      • Moisture Sensor Settings
      • Burner Settings
      • Discharge Speed Control
        • Manual Settings
          • Manual Settings Overview
          • Discharge Capacity
          • Incremental Speed Tables
            • 10% Discharge Speed
            • 20% Discharge Speed
            • 30% Discharge Speed
            • 40% Discharge Speed
            • 50% Discharge Speed
            • 60% Discharge Speed
            • 70% Discharge Speed
            • 80% Discharge Speed
            • 90% Discharge Speed
            • 100% Discharge Speed
          • Speed Tables (All-Heat 5pt)
          • Speed Tables (All-Heat 10pt)
          • Speed Tables (Heat+Cool 5pt)
          • Speed Tables (Heat+Cool 10pt)
          • Setting Discharge Speed Operational Limits
          • Setting Mid-Grain Temperature Alarm Limits
        • TruDry Settings
        • AccuDry Settings
          • AccuDry Technology
          • How AccuDry Works
          • Using AccuDry Mode
    • Historical Data
      • Alarm Pop-Ups and History
      • Alarm List
      • Cool Down Alarms
      • Trending
      • Data Logging History
    • Troubleshooting
      • Service
        • TruDry Settings
        • AccuDry Settings
        • Burners Settings
        • HMI Settings
      • Dryer Components
      • System Configuration
      • PLC I/O Modules
        • CPU
        • Digital Inputs / Outputs
        • Analog Inputs
        • Analog Outputs
        • Digital Inputs
        • Analog Inputs / Outputs
      • Safety Circuit
Powered by GitBook
On this page
Export as PDF
  1. Pinnacle 20|20 Controls
  2. Troubleshooting
  3. Service

HMI Settings

PreviousBurners SettingsNextDryer Components

Last updated 6 months ago

The last button under the Service page is the HMI Settings page.

The upper half of this page displays the information associated with the drive used to update the HMI software along with an activation button used when performing the update.

The bottom half of the page displays the Network Settings along with a PLC comms button that illuminates green when the PLC is communicating properly.