Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
L1000 L1500 L2000
1.0
211
4.9
L3000 L4000 L5000 L6000
1.9
422
9.8
E300 / E300h
0.7
75
1.7
E400 / E400h
0.7
100
2.3
E500 / E500h
0.7
125
2.9
E600 / E600h
0.7
151
3.5
E700 / E700h
0.7
176
4.1
D600 / D600h
1.0
140
3.3
D900 / D900h
1.0
211
4.9
D1200 / D1200h
1.2
264
6.1
D1500 / D1500h
1.4
316
7.4
D1800 / D1800h
1.7
380
8.8
D2100 / D2100h
1.9
422
9.8
D2400 / D2400h
2.3
506
11.8
D3200 / D3200h
2.3
675
15.7
F320 / F320x
1.0
140
3.3
F480 / F480x
1.0
211
4.9
F660 / F660x
1.4
316
7.4
10530
0.7
211
4.9
10740
0.7
295
6.9
10950
0.7
380
8.8
101160
0.7
464
10.8
101375
0.7
548
12.8
12-20-100
0.7
422
9.8
12-24-125
0.7
506
11.8
12-28-150
0.7
590
13.8
3000
0.3
604
14.1
3500
0.3
680
15.8
4000
0.3
755
17.6
4800
0.3
831
19.4
The charts on the following pages show the discharge speed in 10% increments with the corresponding bu/hour, tonnes/hour, VFD Frequency and Metering Speed for each dryer model.
On the bottom of the Discharge Speed Control page are the four discharge modes to toggle between. Each discharge mode has a separate set of settings.
Each dryer model has a discharge capacity for every revolution of the metering rolls for profile dryers and sweep for tower dryers. These discharge capacities are used to calculate how much grain is being discharged from the dryer given a specific discharge speed. The chart below shows what these discharge capacities are in bushels per revolution and cubic meters per revolution.
| Model(s) | bu/rev | m3/rev |
|---|---|---|
Regardless of which discharge mode settings page is displayed, the operator can change the discharge mode from any one of them. However, it is important to understand that in order to change discharge modes, the operator must be in Manual mode first before changing to any of the other available modes. For instance, if the dryer is currently discharging in AccuDry mode and the operator wants to change to TruDry mode, the operator must first select Manual mode, and then select TruDry mode.
In addition to being able to select the mode of discharge from any of these pages, the Manual, TruDry and AccuDry Settings pages also all contain the same information for the following tiles: Disch Speed, Disch Speed Alarms, and Mid-Grain Temperature Alarms.
When discharging in Manual mode, the operator controls the speed at which the grain discharges at. This adjustable value is under the Manual Settings tile, next to the Set Discharge Speed, input box.
L1000 - L6000
3.667
0.1292
D600 / D600h
2.433
0.0857
D900 / D900h - D2400 / D2400h
3.667
0.1292
D3200 / D3200h
4.889
0.1723
E300 / E300h
1.825
0.0643
E400 / E400h
2.433
0.0857
E500 / E500h
3.042
0.1072
E600 / E600h
3.667
0.1292
E700 / E700h
4.278
0.1507
10530
5.000
0.1786
10740
7.000
0.2500
10950
9.000
0.3214
101160
11.000
0.3929
101375
13.000
0.4643
12-20-100
10.000
0.35714
12-24-125
12.000
0.4286
12-28-150
14.000
0.4934
3000
40.000
1.4286
3500
45.000
1.6071
4000
50.000
1.7857
4800
55.000
1.9643
L1000 L1500 L2000
1.9
422
9.8
L3000 L4000 L5000 L6000
3.8
843
19.6
E300 / E300h
1.4
150
3.5
E400 / E400h
1.4
200
4.7
E500 / E500h
1.4
250
5.8
E600 / E600h
1.4
301
7.0
E700 / E700h
1.4
351
8.2
D600 / D600h
1.9
280
6.5
D900 / D900h
1.9
422
9.8
D1200 / D1200h
2.4
527
12.3
D1500 / D1500h
2.9
633
14.7
D1800 / D1800h
3.5
759
17.7
D2100 / D2100h
3.8
843
19.6
D2400 / D2400h
4.6
1,012
23.6
D3200 / D3200h
4.6
1,349
31.4
F320 / F320x
1.9
280
6.5
F480 / F480x
1.9
422
9.8
F660 / F660x
2.9
633
14.7
10530
1.4
422
9.8
10740
1.4
590
13.8
10950
1.4
759
17.7
101160
1.4
928
21.6
101375
1.4
1,096
25.5
12-20-100
1.4
843
19.6
12-24-125
1.4
1,012
23.6
12-28-150
1.4
1,181
27.5
3000
0.5
1,209
28.2
3500
0.5
1,360
31.7
4000
0.5
1,511
35.2
4800
0.5
1,662
38.7
L1000 L1500 L2000
3.8
843
19.6
L3000 L4000 L5000 L6000
7.7
1,687
39.3
E300 / E300h
2.7
300
7.0
E400 / E400h
2.7
400
9.3
E500 / E500h
2.7
500
11.6
E600 / E600h
2.7
602
14.0
E700 / E700h
2.7
703
16.4
D600 / D600h
3.8
560
13.0
D900 / D900h
3.8
843
19.6
D1200 / D1200h
4.8
1,054
24.6
D1500 / D1500h
5.8
1,265
29.5
D1800 / D1800h
6.9
1,518
35.4
D2100 / D2100h
7.7
1,687
39.3
D2400 / D2400h
9.2
2,024
47.1
D3200 / D3200h
9.2
2,699
62.9
F320 / F320x
3.8
560
13.0
F480 / F480x
3.8
843
19.6
F660 / F660x
5.8
1,265
29.5
10530
2.8
843
19.6
10740
2.8
1,181
27.5
10950
2.8
1,518
35.4
101160
2.8
1,855
43.2
101375
2.8
2,193
51.1
12-20-100
2.8
1,687
39.3
12-24-125
2.8
2,024
47.1
12-28-150
2.8
2,361
55.0
3000
1.0
2,417
56.3
3500
1.0
2,719
63.3
4000
1.0
3,022
70.4
4800
1.0
3,324
77.4
L1000 L1500 L2000
4.8
1,054
24.6
L3000 L4000 L5000 L6000
9.6
2,109
49.1
E300 / E300h
3.4
375
8.7
E400 / E400h
3.4
500
11.6
E500 / E500h
3.4
625
14.6
E600 / E600h
3.4
753
17.5
E700 / E700h
3.4
879
20.5
D600 / D600h
4.8
699
16.3
D900 / D900h
4.8
1,054
24.6
D1200 / D1200h
6.0
1,318
30.7
D1500 / D1500h
7.2
1,581
36.8
D1800 / D1800h
8.6
1,898
44.2
D2100 / D2100h
9.6
2,109
49.1
D2400 / D2400h
11.5
2,530
58.9
D3200 / D3200h
11.5
3,373
78.6
F320 / F320x
4.8
699
16.3
F480 / F480x
4.8
1,054
24.6
F660 / F660x
7.2
1,581
36.8
10530
3.5
1,054
24.6
10740
3.5
1,476
34.4
10950
3.5
1,898
44.2
101160
3.5
2,319
54.0
101375
3.5
2,741
63.8
12-20-100
3.5
2,108
49.1
12-24-125
3.5
2,530
58.9
12-28-150
3.5
2,952
68.8
3000
1.3
3,022
70.4
3500
1.3
3,399
79.2
4000
1.3
3,777
88.0
4800
1.3
4,155
96.8
L1000 L1500 L2000
5.8
1,265
29.5
L3000 L4000 L5000 L6000
11.5
2,530
58.9
E300 / E300h
4.1
450
10.5
E400 / E400h
4.1
600
14.0
E500 / E500h
4.1
750
17.5
E600 / E600h
4.1
904
21.0
E700 / E700h
4.1
1,054
24.6
D600 / D600h
5.8
839
19.6
D900 / D900h
5.8
1,265
29.5
D1200 / D1200h
7.2
1,581
36.8
D1500 / D1500h
8.6
1,898
44.2
D1800 / D1800h
10.4
2,277
53.0
D2100 / D2100h
11.5
2,530
58.9
D2400 / D2400h
13.8
3,036
70.7
D3200 / D3200h
13.8
4,048
94.3
F320 / F320x
5.8
839
19.6
F480 / F480x
5.8
1,265
29.5
F660 / F660x
8.6
1,898
44.2
10530
4.2
1,265
29.5
10740
4.2
1,771
41.3
10950
4.2
2,277
53.0
101160
4.2
2,783
64.8
101375
4.2
3,289
76.6
12-20-100
4.2
2,530
58.9
12-24-125
4.2
3,036
70.7
12-28-150
4.2
3,542
82.5
3000
1.5
3,626
84.5
3500
1.5
4,079
95.0
4000
1.5
4,532
105.6
4800
1.5
4,986
116.1
L1000 L1500 L2000
7.7
1,687
39.3
L3000 L4000 L5000 L6000
15.3
3,374
78.6
E300 / E300h
5.5
600
14.0
E400 / E400h
5.5
799
18.6
E500 / E500h
5.5
1,000
23.3
E600 / E600h
5.5
1,205
28.1
E700 / E700h
5.5
1,406
32.7
D600 / D600h
7.7
1,119
26.1
D900 / D900h
7.7
1,687
39.3
D1200 / D1200h
9.6
2,109
49.1
D1500 / D1500h
11.5
2,530
58.9
D1800 / D1800h
13.8
3,036
70.7
D2100 / D2100h
15.3
3,374
78.6
D2400 / D2400h
18.4
4,048
94.3
D3200 / D3200h
18.4
5,397
125.7
F320 / F320x
7.7
1,119
26.1
F480 / F480x
7.7
1,687
39.3
F660 / F660x
11.5
2,530
58.9
10530
5.6
1,687
39.3
10740
5.6
2,361
55.0
10950
5.6
3,036
70.7
101160
5.6
3,711
86.4
101375
5.6
4,386
102.2
12-20-100
5.6
3,373
78.6
12-24-125
5.6
4,048
94.3
12-28-150
5.6
4,723
110.0
3000
2.0
4,835
112.6
3500
2.0
5,439
126.7
4000
2.0
6,043
140.8
4800
2.0
6,647
154.8
L1000 L1500 L2000
2.9
633
14.7
L3000 L4000 L5000 L6000
5.8
1,265
29.5
E300 / E300h
2.1
225
5.2
E400 / E400h
2.1
300
7.0
E500 / E500h
2.1
375
8.7
E600 / E600h
2.1
452
10.5
E700 / E700h
2.1
527
12.3
D600 / D600h
2.9
420
9.8
D900 / D900h
2.9
633
14.7
D1200 / D1200h
3.6
791
18.4
D1500 / D1500h
4.3
949
22.1
D1800 / D1800h
5.2
1,139
26.5
D2100 / D2100h
5.8
1,265
29.5
D2400 / D2400h
6.9
1,518
35.4
D3200 / D3200h
6.9
2,024
47.1
F320 / F320x
2.9
420
9.8
F480 / F480x
2.9
633
14.7
F660 / F660x
4.3
949
22.1
10530
2.1
633
14.7
10740
2.1
886
20.6
10950
2.1
1,139
26.5
101160
2.1
1,392
32.4
101375
2.1
1,645
38.3
12-20-100
2.1
1,265
29.5
12-24-125
2.1
1,518
35.4
12-28-150
2.1
1,771
41.3
3000
0.8
1,813
42.2
3500
0.8
2,040
47.5
4000
0.8
2,266
52.8
4800
0.8
2,493
58.1
Since the speed of the discharge impacts the mid-grain temperature, it is on any of these discharge settings pages where the operator can set the mid-grain temperature alarm limits. If the dryer is discharging and the mid-grain temperature exceeds the mid-grain temperature alarm band for a set period of time, the dryer will enter a Cool Down mode. The two alarm limits that can be entered that pertain to the mid-grain temperature are the Alarm Band and Alarm Band Delay.
The Mid-Grain Temperature Alarm Band is the allowed deviation from the mid-grain temperature set point while the discharge system is running.
The Mid-Grain Alarm Band Delay is a user-defined time duration in minutes that will delay the Cool Down of the dryer after the Mid-Grain Band warning alarm has occurred. If the Mid-Grain temperature returns to the acceptable range within this time period, no shut down will occur.
From any of these discharge settings pages (Manual, TruDry, or AccuDry Settings pages), in the Disch Speed tile, the operator can set operational limits that pertain to the discharge speed. The two operational limits the operator can set are the max and min speeds the discharge can run at. With the operational limits in place, the user will not be able to enter a speed in the Set Discharge Speed box of the Manual Settings page that exceeds these limits.
The lowest allowable min limit that can be entered is 10%.
Again, from any of these discharge settings pages, under Disch Speed Alarms, the operator can set alarm limits that pertain to the discharge speed. There are two types limits: high limits and low limits. There also two types of alarms: warning alarms and critical alarms. If a warning alarm limit is exceeded, the control will trigger a warning message to be displayed on the HMI screens. If that particular reading continues further off course and exceeds the critical alarm limit, the dryer will shutdown and a critical alarm message will appear on the HMI screens.
If the Current Speed exceeds the value entered for the High Speed Critical value, the dryer will shut down. The input value for this High Speed Critical alarm must be equal to or greater than the value entered for the High Speed Warning value. To expand the allowable input range for the High Speed Critical value, the High Speed Warning value may first need to be adjusted.
If the Current Speed exceeds the value entered for the High Speed Warning value, the control will display a High Speed warning message. The input value for this High Speed Warning alarm must be equal to or less than the value entered for the High Speed Critical value. The lowest value allowed for this warning is equal to the Low Speed Warning value. To expand the allowable input range for the High Speed Warning value, the High Speed Critical and Low Speed Warning values may first need to be adjusted.
This value is the real time metering speed of the discharge system.
If the Current Speed falls below the value entered for the Low Speed Warning, the control will display a Low Speed warning message. The input value for this Low Speed Warning alarm must be equal to or less than the value entered for the High Speed Warning value. The lowest value allowed for this warning is equal to the Low Speed Critical value. To expand the allowable input range for the Low Speed Warning value, the High Speed Warning and Low Speed Critical values may first need to be adjusted.
If the Current Speed falls below the value entered for the Low Speed Critical, the dryer will shut down. The input value for this Low Speed Critical alarm must be equal to or lower than the value entered for the Low Speed Warning value. To expand the allowable input range for the Low Speed Critical value, the Low Speed Warning value may first need to be adjusted.
Depending on the model dryer, the % discharge speed will correspond to an approximate bu/hr or metric tonnes/hr value for a known discharge capacity. The table below correlates discharge speed % to bu/hr based for the moisture removal (5pt or 10pt) and mode of operation (All-Heat or Heat+Cool) stated above.
| Model(s) | (dry) bu/hr | tonnes/hr | Discharge Speed |
|---|---|---|---|
Depending on the model dryer, the % discharge speed will correspond to an approximate bu/hr or metric tonnes/hr value for a known discharge capacity. The table below correlates discharge speed % to bu/hr based for the moisture removal (5pt or 10pt) and mode of operation (All-Heat or Heat+Cool) stated above.
| Model(s) | (dry) bu/hr | tonnes/hr | Discharge Speed |
|---|---|---|---|
Depending on the model dryer, the % discharge speed will correspond to an approximate bu/hr or metric tonnes/hr value for a known discharge capacity. The table below correlates discharge speed % to bu/hr based for the moisture removal (5pt or 10pt) and mode of operation (All-Heat or Heat+Cool) stated above.
| Model(s) | (dry) bu/hr | tonnes/hr | Discharge Speed |
|---|
Depending on the model dryer, the % discharge speed will correspond to an approximate bu/hr or metric tonnes/hr value for a known discharge capacity. The table below correlates discharge speed % to bu/hr based for the moisture removal (5pt or 10pt) and mode of operation (All-Heat or Heat+Cool) stated above.
| Model(s) | (dry) bu/hr | tonnes/hr | Discharge Speed |
|---|
L1000 L1500 L2000
6.7
1,476
34.4
L3000 L4000 L5000 L6000
13.4
2,952
68.8
E300 / E300h
4.8
525
12.2
E400 / E400h
4.8
699
16.3
E500 / E500h
4.8
875
20.4
E600 / E600h
4.8
1,054
24.6
E700 / E700h
4.8
1,230
28.6
D600 / D600h
6.7
979
22.8
D900 / D900h
6.7
1,476
34.4
D1200 / D1200h
8.4
1,845
43.0
D1500 / D1500h
10.1
2,214
51.6
D1800 / D1800h
12.1
2,657
61.9
D2100 / D2100h
13.4
2,952
68.8
D2400 / D2400h
16.1
3,542
82.5
D3200 / D3200h
16.1
4,723
110.0
F320 / F320x
6.7
979
22.8
F480 / F480x
6.7
1,476
34.4
F660 / F660x
10.1
2,214
51.6
10530
4.9
1,476
34.4
10740
4.9
2,066
48.1
10950
4.9
2,657
61.9
101160
4.9
3,247
75.6
101375
4.9
3,837
89.4
12-20-100
4.9
2,952
68.8
12-24-125
4.9
3,542
82.5
12-28-150
4.9
4,133
96.3
3000
1.8
4,230
98.5
3500
1.8
4,759
110.9
4000
1.8
5,288
123.2
4800
1.8
5,817
135.5
L1000 L1500 L2000
9.6
2,109
49.1
L3000 L4000 L5000 L6000
19.2
4,217
98.2
E300 / E300h
6.8
750
17.5
E400 / E400h
6.8
999
23.3
E500 / E500h
6.8
1,249
29.1
E600 / E600h
6.8
1,506
35.1
E700 / E700h
6.8
1,757
40.9
D600 / D600h
9.6
1,399
32.6
D900 / D900h
9.6
2,109
49.1
D1200 / D1200h
12.0
2,636
61.4
D1500 / D1500h
14.4
3,163
73.7
D1800 / D1800h
17.3
3,795
88.4
D2100 / D2100h
19.2
4,217
98.2
D2400 / D2400h
23.0
5,060
117.9
D3200 / D3200h
23.0
6,747
157.2
F320 / F320x
9.6
1,399
32.6
F480 / F480x
9.6
2,109
49.1
F660 / F660x
14.4
3,163
73.7
10530
7.0
2,108
49.1
10740
7.0
2,952
68.8
10950
7.0
3,795
88.4
101160
7.0
4,639
108.0
101375
7.0
5,482
127.7
12-20-100
7.0
4,217
98.2
12-24-125
7.0
5,060
117.9
12-28-150
7.0
5,904
137.5
3000
2.5
6,043
140.8
3500
2.5
6,799
158.4
4000
2.5
7,554
176.0
4800
2.5
8,309
193.5
L1000 L1500 L2000
8.6
1,898
44.2
L3000 L4000 L5000 L6000
17.3
3,795
88.4
E300 / E300h
6.2
675
15.7
E400 / E400h
6.2
899
20.9
E500 / E500h
6.2
1,124
26.2
E600 / E600h
6.2
1,355
31.6
E700 / E700h
6.2
1,581
36.8
D600 / D600h
8.6
1,259
29.3
D900 / D900h
8.6
1,898
44.2
D1200 / D1200h
10.8
2,372
55.3
D1500 / D1500h
12.9
2,847
66.3
D1800 / D1800h
15.5
3,416
79.6
D2100 / D2100h
17.3
3,795
88.4
D2400 / D2400h
20.7
4,554
106.1
D3200 / D3200h
20.7
6,072
141.4
F320 / F320x
8.6
1,259
29.3
F480 / F480x
8.6
1,898
44.2
F660 / F660x
12.9
2,847
66.3
10530
6.3
1,898
44.2
10740
6.3
2,657
61.9
10950
6.3
3,416
79.6
101160
6.3
4,175
97.2
101375
6.3
4,934
114.9
12-20-100
6.3
3,795
88.4
12-24-125
6.3
4,554
106.1
12-28-150
6.3
5,313
123.8
3000
2.3
5,439
126.7
3500
2.3
6,119
142.5
4000
2.3
6,799
158.4
4800
2.3
7,478
174.2
L1000
600
14.3
28%
L1500
880
21.0
42%
L2000
1,040
24.8
49%
L3000
1,460
34.8
35%
L4000
1,860
44.4
44%
L5000
2,280
54.4
54%
L6000
2,680
64.0
64%
D600h
520
12.4
37%
D900h
790
18.9
37%
D1200h
1,030
24.6
39%
D1500h
1,260
30.1
40%
D1800h
1,490
35.6
39%
D2100h
1,720
41.1
41%
D2400h
1,950
46.5
39%
D3200h
2,620
62.5
39%
E300 / E300h
270
6.4
36%
E400 / E400h
360
8.6
36%
E500 / E500h
445
10.6
36%
E600 / E600h
535
12.8
36%
E700 / E700h
625
14.9
36%
F320
465
11.1
33%
F320x
640
15.3
46%
F480
700
16.7
33%
F480x
950
22.7
45%
F660
950
22.7
30%
F660x
1,295
30.9
41%
L1000
1,270
30.3
60%
L1500
1,830
43.7
87%
L2000
2,220
53.0
100%
L3000
3,060
73.0
73%
L4000
3,910
93.3
93%
L5000
4,770
113.8
100%
L6000
5,600
133.7
100%
D600h
1,070
25.5
76%
D900h
1,640
39.1
78%
D1200h
2,120
50.6
80%
D1500h
2,600
62.1
82%
D1800h
3,080
73.5
81%
D2100h
3,560
85.0
84%
D2400h
4,040
96.4
80%
D3200h
5,420
129.4
80%
E300 / E300h
550
13.1
73%
E400 / E400h
730
17.4
73%
E500 / E500h
910
21.7
73%
E600 / E600h
1,100
26.3
73%
E700 / E700h
1,280
30.5
73%
F320
965
23.0
69%
F320x
1,315
31.4
94%
F480
1,455
34.7
69%
F480x
1,960
46.8
93%
F660
1,960
46.8
62%
F660x
2,660
63.5
84%
L1000 | 700 | 16.3 | 33% |
L1500 | 1,050 | 24.5 | 50% |
L2000 | 1,320 | 30.8 | 63% |
L3000 | 1,700 | 39.6 | 40% |
L4000 | 2,280 | 53.1 | 54% |
L5000 | 2,870 | 66.9 | 68% |
L6000 | 3,470 | 80.9 | 82% |
D600 / D600h | 660 | 15.4 | 47% |
D900 / D900h | 1000 | 23.3 | 47% |
D1200 / D1200h | 1280 | 29.8 | 49% |
D1500 / D1500h | 1560 | 36.4 | 49% |
D1800 / D1800h | 1840 | 42.9 | 48% |
D2100 / D2100h | 2120 | 49.4 | 50% |
D2400 / D2400h | 2410 | 56.2 | 48% |
D3200 / D3200h | 3230 | 75.3 | 48% |
E300 | 310 | 7.2 | 41% |
E400 | 410 | 9.6 | 41% |
E500 | 510 | 11.9 | 41% |
E600 | 610 | 14.2 | 41% |
E700h | 710 | 16.6 | 40% |
F320 | 570 | 13.3 | 41% |
F320x | 815 | 19.0 | 58% |
F480 | 855 | 19.9 | 41% |
F480x | 1,215 | 28.3 | 58% |
F660 | 1,155 | 26.9 | 37% |
F660x | 1,650 | 38.4 | 52% |
10530 | 700 | 16.3 | 33% |
10740 | 930 | 21.7 | 32% |
10950 | 1,240 | 28.9 | 33% |
101160 | 1,500 | 35.0 | 32% |
101375 | 1,700 | 39.6 | 31% |
12-20-100 | 2,000 | 46.6 | 47% |
12-24-125 | 2,400 | 55.9 | 47% |
12-28-150 | 2,800 | 65.3 | 47% |
3000 | 3,000 | 69.9 | 50% |
3500 | 3,500 | 81.6 | 51% |
4000 | 4,000 | 93.2 | 53% |
4800 | 4,800 | 111.9 | 58% |
L1000 | 390 | 9.1 | 18% |
L1500 | 600 | 14.0 | 28% |
L2000 | 750 | 17.5 | 36% |
L3000 | 940 | 21.9 | 22% |
L4000 | 1,300 | 30.3 | 31% |
L5000 | 1,660 | 38.7 | 39% |
L6000 | 2,000 | 46.6 | 47% |
D600 / D600h | 380 | 8.9 | 27% |
D900 / D900h | 580 | 13.5 | 28% |
D1200 / D1200h | 740 | 17.2 | 28% |
D1500 / D1500h | 900 | 21.0 | 28% |
D1800 / D1800h | 1,060 | 24.7 | 28% |
D2100 / D2100h | 1,220 | 28.4 | 29% |
D2400 / D2400h | 1,380 | 32.2 | 27% |
D3200 / D3200h | 1,860 | 43.4 | 28% |
E300 | 175 | 4.1 | 23% |
E400 | 230 | 5.4 | 23% |
E500 | 290 | 6.8 | 23% |
E600 | 345 | 8.0 | 23% |
E700h | 405 | 9.4 | 23% |
F320 | 330 | 7.7 | 24% |
F320x | 475 | 11.1 | 34% |
F480 | 490 | 11.4 | 23% |
F480x | 710 | 16.5 | 34% |
F660 | 665 | 15.5 | 21% |
F660x | 960 | 22.4 | 30% |
10530 | 400 | 9.3 | 19% |
10740 | 540 | 12.6 | 18% |
10950 | 720 | 16.8 | 19% |
101160 | 870 | 20.3 | 19% |
101375 | 1,000 | 23.3 | 18% |
12-20-100 | 1,160 | 27.0 | 28% |
12-24-125 | 1,390 | 32.4 | 27% |
12-28-150 | 1,620 | 37.8 | 27% |
3000 | 1,800 | 42.0 | 30% |
3500 | 2,100 | 49.0 | 31% |
4000 | 2,400 | 55.9 | 32% |
4800 | 2,800 | 65.3 | 34% |